Keurig K75 User's Guide download pdf (Page 10)

SECTION 2 Controls & Indicators (LCD Control Center)

Setting the Clock

Setting the clock is optional. When the clock is set, the time will appear in the

LCD Control Center. NOTE: You must set the clock if you will be using the Auto

On/Off Time programming feature.

Press the MENU Button.

2. The word “OFF” will appear at the top of the

LCD Control Center to indicate that the clock

is not set (fig. 10). The programming options

will appear on the LCD Control Center with a

small arrow pointing to “SET CLOCK.”

“H” (Hour) will appear above the Left Button

and “M” (Minute) will appear above the Right

Button. The “H” and “M” icons and Left and

Right Buttons will flash.

3. Press or hold the Left Button under the

flashing “H” until you have reached the

appropriate hour. If the hour has passed 12,

“PM” will be shown.

4. Press or hold the Right Button under the

flashing “M” to set the minutes.

5. When you have reached the correct time, press the MENU Button six

times to scroll through the remaining programming steps.

fig.

6. The correct time should now be displayed in the LCD Control Center.

NOTE: If power is interrupted to the brewer by unplugging it, or if power is

lost, follow the procedure above to reset the time as the clock will not be

visible until the time is set. Brew size and brew temperature settings are

remembered and restored automatically. All other settings will be restored

automatically after clock is set.

Programming On/Off Features

The brewer provides three modes so that you can enjoy gourmet coffee, tea

or hot cocoa on your own schedule. By programming your brewer to turn on

each morning, you will never have to wait for the brewer to warm up to brew

a gourmet cup of coffee. It will take the brewer approximately 4 minutes to

warm up from room temperature.

1. Leave it ON all the time. The brewer can be left on all the time so that it is

always ready to brew a fresh cup of gourmet coffee, tea or hot cocoa. To

turn the brewer off at any time, simply press and release the Power

Switch. (NOTE

Although the clock remains on, if set, you can not brew a cup

of coffee, tea or hot cocoa.)

Press and release the Power Switch again to

restore power to the brewer. You will have to wait for the water to heat up

before the brewer is ready to brew.

2. Set the brewer to “AUTO OFF” following a specified period of time after the

last brew.

a. Press the MENU Button twice to program the Auto Off feature. The LCD

Control Center will display the programming options with a small arrow

next to “SET AUTO OFF” (fig. 11).

P10 201309003 KER755_K70-75.pdf 1C( K) ZB2319 2013.09.06

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments

Keurig K75 User's Guide Page 10

Comments to this Manuals

Related products and manuals for Small kitchen appliances Keurig K75