Keurig K75 User's Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
14
15
Descaling Procedure
Before you begin, you will need a large ceramic mug, fresh water, descale
solution and access to a sink. Do not use a paper cup.
• EmptythewaterfromtheWaterReservoir.IfthereisaKeurig
Water
Filter, remove and set aside. Disable “Auto Off” features, if necessary
(refer to page 10).
STEP 1: FIRST DESCALING SOLUTION RINSE
• PressthePowerSwitchtopowerthebreweroff.
• PourtheentirebottleofKeurig
Descaling Solution into the Water Reservoir.
Then fill the empty bottle with water and pour into the Water Reservoir. Press
the Power Switch to turn the brewer back on.
• PlacealargemugontheDripTrayPlateandrunacleansingbrewusing
the largest brew size. Do not use a K-Cup
®
pack. Pour the contents of the
mug into the sink.
STEP 2: SECOND DESCALING SOLUTION RINSE
• RepeatthebrewprocesswithoutaK-Cup
®
pack, until ADD WATER is
indicated. Let brewer stand for at least 30 minutes while still on.
• After30minutes,discardanyresidualsolutionandrinsetheWater
Reservoir thoroughly.
STEP 3: FRESH WATER RINSE
• EnsuretheWaterReservoirisfilledwithfreshwatertoandnotbeyondthe
MAX FILL line.
• PlacealargemugontheDripTrayPlateandrunacleansingbrewusing
the largest brew size. Do not use a K-Cup
®
pack. Pour the contents of the
mug into the sink.
• Repeatbrewprocessuntilyouhavecompletedatleast12brewsusingthe
largest brew size. You may need to refill the Water Reservoir at least one
time during this process.
NOTE: If “DESCALE” is still indicated after completing the procedure,
repeat the descaling procedure above.
NOTE: The cleaning action of Keurig
Descaling Solution may result in a foam
dispensed from the brewer. This is natural, as the solution is reacting with
the scale inside. For a brewer that is heavily scaled, the brewer may not fill
properly after the descaler is added. If this occurs, you may see only a small or
no output dispensed followed by the sound of air blowing out. If this occurs:
• Turnoffandunplugthebrewer.
• IfthereisKeurig
Descaling Solution in the Water Reservoir, discard the
contents, rinse the Water Reservoir thoroughly and refill with water.
• Plugthebrewerbackin,poweron,andrepeattheStep3FreshWater
Rinse cycle. The brewer should begin to function normally as the solution
is rinsed out and the scale is removed. If problem persists, allow brewer to
sit unplugged for at least 30 minutes before continuing with the rinse.
Visit us online for more information at www.keurig.com/descaling.
P15 201309003 KER755_K70-75.pdf 1C( K) ZB2319 2013.09.06
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments